CDM Dolmen
Software house
Structural calculation software - geotechnics and fire resistance
CDM DOLMEN is an Italian company that has been developing the DOLMEN calculation software for structural and geotechnical calculations for over 30 years. CDM Dolmen has particularly developed a modular system of software dedicated to the calculation and design of three-dimensional structures in reinforced concrete, prestressed concrete, steel, wood, aluminum, and masonry, both in seismic and non-seismic zones, with modules for foundations, up to software for verifying structures subject to fire.
In the field of geotechnics, CDM Dolmen offers software for the calculation of retaining walls, walls, shallow and deep foundations, for verifying slope stability, and for the characterization of soils and rocks.
|
IS GeoMassi - Geotechnical Software
CDM Dolmen IS GeoMassi is the software that calculates the 3-dimensional rock fall on a slope using the 'Lumped Mass hybrid' method combined with statistical analysis. The slope morphology... |
|
IS GeoPendii - Geotechnical Software
CDM Dolmen The software is equipped with an interactive graphical environment that allows to define the case to be analysed: stratigraphy, strata, loads and interventions. |
|
IS GeoRocce - Geotechnical Software
CDM Dolmen It also allows the insertion and visualisation of poles of discontinuities on the rock face, which allows stability analysis. The program performs the analysis of planar and wedge... |
|
IS GeoStrati - Geotechnical Software
CDM Dolmen The software calculates the geotechnical parameters of the soil, in particular the volume weight, the angle of internal friction, the modulus of elasticity, etc. To determine... |
|
IS Muri - Geotechnical Software
CDM Dolmen IS Muri carries out checks on overturning stability, rolling stability, bearing capacity and overall stability; the method used to calculate the thrusts is the 'wedge balance' or... |
|
IS Palificate - Geotechnical Software
CDM Dolmen The types of piles that can be analysed are the precast pile, the bored pile, the helical pile, the screw pile and the micropile. The software also offers the possibility to... |
|
IS Paratie - Geotechnical Software
CDM Dolmen This software allows you to insert one or two walls of any material and any section, even variable sections along the height, and to define the phasing of the construction work by... |
|
IS ProGeo - Geotechnical Software
CDM Dolmen IS IperFond calculates the bearing capacity of shallow foundations in the case of multi-layered soils and possibly with groundwater. IS GeoRel generates the geotechnical... |
