This fully BIM-designed bridge project was calculated by the engineering firm...
SITEMAP
PLATE-BUCKLING for buckling of plates
PLATE-BUCKLING analyzes the buckling of rectangular plates according to the European standard EN 1993-1-5 and the German standard DIN 18800-3 with or without horizontal and vertical stiffeners (flat plates, angles, T- or C-shaped sections). The loading can be applied on the plate boundaries in several ways. Any load and buckling mode can be visualized in a realistic animated representation offering more detailed information about the behavior of the stiffened plate.
Software keywords PLATE-BUCKLING
| Structural analysis - design software for steel - concrete - wood constructions | Structural analysis - design software for steel - concrete - wood constructions | Structural analysis - design software for steel - concrete - wood constructions | ||||||
|
|
|
| Structural analysis - design software for steel - concrete - wood constructions | ||||
|
Company news |
|
RFEM was used in the BIM project for the bridge expansion at the SEW-Eurodrive plant.
08.09.2025
|
|
The RFEM software was used to calculate a spiral metal staircase located in an office building in London.
Based on the manufacturer's BIM model, engineers at Matrix created a 3D finite... 02.06.2025
|
|
RFEM software was used for the calculation of a wind measuring mast on the Radstadt Tauern in Austria.
The construction of a 100-meter tall mast, located at an altitude of around... 08.05.2025
|
